BASE OIL SN 150 2023-07-02T22:07:15+00:00

Project Description

Base Oil SN 150 would be one of the base oils produced by Aras Petrochemical Company with wide applications in the industry. This base oil is the result of solvent extraction and waxing processes and is used as one of the best group I base oils in the formulation of gasoline and diesel engine oils, industrial lubricants, greases, and special products.

Name Base Oil SN 150
Manufacturer Aras Petrochemical Co
Product Code SN 150
Contact Supplier


Table scrolling horizontally

Material Safety Data Sheet of Base Oil SN 150
Product Name Base Oil SN 150
Catalog Codes SN150
Base Oil SN 150 CAS 74869-22-0
RTECS Not Available
TSCA Not Available
Synonym Lubricant Oil
Chemical Name Not Available
Chemical Formula
HAZARDS IDENTIFICATION  Not classified as Dangerous Goods by the criteria of the “Australian Code for the Transport of Dangerous Goods
by Road & Rail” and the “New Zealand NZS5433: Transport of Dangerous Goods on Land”.
Classified as a C2 (COMBUSTIBLE LIQUID) for the purpose of storage and handling, in accordance with the
requirements of AS 1940. Refer to State Regulations for storage and transport requirements.
 FIRST AID MEASURES If poisoning occurs, contact a doctor or Poisons Information Centre (Phone Australia 131 126, New Zealand 0800
764 766).
Inhalation: Remove the victim from exposure – avoid becoming a casualty. Remove contaminated clothing and
loosen the remaining clothing. Allow the patient to assume the most comfortable position and keep warm. Keep at rest until
fully recovered. Seek medical advice if the effects persist. Skin Contact: If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running
water. If swelling, redness, blistering, or irritation occurs seek medical assistance.
Eye contact: If in eyes wash out immediately with water. In all cases of eye contamination, it is a sensible
precaution to seek medical advice.
Ingestion: Rinse mouth with water. If swallowed, do NOT induce vomiting. Give a glass of water to drink.
Never give anything by mouth to an unconscious patient. If vomiting occurs give further water. Seek medical
PPE for First Aiders: Wear safety shoes, overalls, gloves, and safety glasses. Available information suggests that
gloves made from nitrile rubber should be suitable for intermittent contact. However, due to variations in glove
construction and local conditions, the user should make a final assessment. Always wash your hands before smoking,
eating, drinking, or using the toilet. Wash contaminated clothing and other protective equipment before storing or
Notes to physician: Treat symptomatically.
FIRE FIGHTING MEASURES Hazchem Code: Not applicable.
Suitable extinguishing media: If material is involved in a fire use water fog (or if unavailable fine water spray),
alcohol-resistant foam, standard foam, or dry agent (carbon dioxide, dry chemical powder).
Specific hazards: Combustible liquid.
Fire fighting further advice: On burning or decomposing may emit toxic fumes. Firefighters are to wear self-contained breathing apparatus and suitable protective clothing if the risk of exposure to vapor or products of
combustion or decomposition.

Table scrolling horizontally


Base Oil SN 150 Technical Details

It is known as a light-base oil at the lower end of the grade A light-base oil specification. It is mostly used in the production of lubricant additives. This is a Group I base oil that has gone through solvent purification processes. To complete the refinement, the hydrogen was purged to remove any impurities. this type of Base oil is known as a base for lubricants. The most important volume constituent of lubricants is the base oil and on average it constitutes more than 1% of the formulation of a lubricant. In some lubricants (compressor and hydraulic oil), 2% of the oil is the base oil and only 2% is the additive. Base oils can be obtained from petroleum or non-petroleum sources. Most of the world’s base oils are obtained from crude oil refining. The main components of base oil are paraffinic, naphthenic, and aromatic compounds.

Base Oil SN 150 Uses 

This grade of Base Oil is mostly used by the lubricant industry and acts as the primary reserve for several industrial lubricants such as:

  • General oils productions
  • Mold oil
  • Transmission fluids
  • Gear oils
  • Metalworking fluids
  • Oil Additives
  • Hydraulic oils
  • Transformer oils

Base Oil SN 150 How affects the performance of the final lubricant

  • Volatile property: it will prevent oil reduction, oil thickening, and sediment formation
  • Surface activity: preventing foaming, air diffusion, emulsion formation, and pressure.
  • Oxidation: it will prevent sediment formation, oil concentration, sludge formation, and corrosion of metals.
  • Viscosity: it has low-temperature fluidity, energy dissipation, wears protection, and proper cooling.
  • Solvent power: it will help with engine cleaning, sealant compatibility, process applications, and formulation stability.

Base Oil Packing

Standard packing for this grade of Base Oil would be Flexi with 20 MT net weight or 190 KG or 200 KG drums.


Specifications of Base Oil SN 150
Color 1.5-2.5
Kinematic viscosity
at 100°C
6-7.5 mm2/s (CST)
Kinematic viscosity
at 40°C
40-45 mm2/s (CST)
Viscosity index 90-100
Flash Point +190 °C
Pour point -3 °C
Density @15.6 °C 0.864 – 0.874 g/lit
T.A.N 0.05 mg/Kg


Open WhatsApp
Aras Petrochemical WhatsApp
Contact us on WhatsApp